crosconnect.blogg.se - Hard reset radbeacon

#HARD RESET RADBEACON FOR MAC#
#HARD RESET RADBEACON PDF#
#HARD RESET RADBEACON CODE#

It provides the facility to produce, distribute and monetize your concepts and articles through electronic flipbooks for mobiles, capsules and personal computers.

#HARD RESET RADBEACON PDF#

It produces interesting flipbooks fróm PDF for ány cellular design and dimension and that as well without any particular coding.įlipbook Creator provides the choice of creating all images, pictures into a flash flipbook or convert PDF files to a fIipping e-book. It can help you develop a repertoire óf e-magazines, é-books, catalogs, papers and very much more. If at any point you get stuck or have questions, please email us at and we'll do our best to assist you.It helps one draw, edit and paint animations regarding to ones needs. This means that you should be able to continue using Simple In/Out with the Beacon. If the Beacon is still plugged in the Simple In/Out app should tell you that the Beacon is in range. For a final test, open Simple In/Out, go to Settings, Locations, and tap on the Beacon.

#HARD RESET RADBEACON CODE#

Enter the pin code (pin code is all zeros whether you need 4 or 8, it should tell you how many you need) and press OK after the changes have been applied.Īt this point your Beacon should be upgraded to version 3.2.3 and able to be used with Simple In/Out again.

Press the Apply button in the bottom right.

Copy and Paste the UUID saved from step 7 into the UUID field.

Once the Beacon shows up in the list again it will be reset to factory settings and need to be reconfigured to work with Simple In/Out again.

Power cycle the RadBeacon USB and press the Start Scanning button again to look for the Beacon again.

You should get a message that the process completed Ok.

Select radbeacon-usb-3-2-3 from the list and press OK.

The app should automatically detect the Beacon in DFU mode and prompt you to change the firmware version.

Press the OK button on the DFU information message.

Press the DFU button and enter the Beacon pin code (pin code is all zeros whether you need 4 or 8, it should tell you how many you need) and press OK.

Paste this value into a text file or place you can use it again for safe keeping. It is a long character string that looks similar to this (2F234454-CF6D-4A0F-ADF2-F4911BA9FFA6).

Select and Copy the UUID value listed.

Select the Beacon in the list (if more than 1 shows up).

If it is version 3.2.3 or later, your Beacon is already up-to-date and you can skip the remaining steps.

It should be called SIO Beacon or RadBeacon USB.

Press the Start Scanning button in the RadBeacon app.

computer USB port or wall mounted power supply)

Plug in your RadBeacon USB to an approved power supply (e.g.

(the Beacons have a 30 minute lockout and power cycling is necessary)

#HARD RESET RADBEACON FOR MAC#

To upgrade your firmware with a Mac computer you will need the free RadBeacon for Mac app.

If you do not have access to a Mac please contact us at the email above to arrange for a replacement. If you don't have access or means to check, you can contact us at upgrade your RadBeacon USB firmware you will need a Mac computer running OS X 10.10 or later. If you aren't sure, you can check your Beacons firmware. We recommend using firmware version 3.2.3 for any use with the Simple In/Out platform. If you purchased a RadBeacon USB device from Simple In/Out it is possible it has older firmware and may not work consistently with Simple In/Out.